Tunable magnetophoretic method for distinguishing and separating wear debris particles in an Fe-PDMS-based microfluidic chip

Wear debris analysis provides an early warning of mechanical transmission system aging and wear fault diagnosis, which has been widely used in machine health monitoring. The ability to detect and distinguish the ferromagnetic and nonmagnetic debris in oil is becoming an effective way to assess the health status of machinery. In this work, an Fe-poly(dimethylsiloxane) (PDMS)-based magnetophoretic method for the continuous separation of ferromagnetic iron particles by diameter and the isolation of ferromagnetic particles and nonmagnetic particles with similar diameter by type is developed. The particles experience magnetophoretic effects when passing through the vicinity of the Fe-PDMS where the strongest gradient of the magnetic fields exists. By choosing a relatively short distance between the magnet and the sidewall of the horizontal main channel and the length of Fe-PDMS with controlled particles flow rate, the diameter-dependent separation of ferromagnetic iron particles, that is, smaller than 7 µm, in the range of 8–12 µm, and larger than 14 µm, and the isolation of ferromagnetic iron particles and nonmagnetic aluminum particles based on opposite magnetophoretic behaviors by types are demonstrated, providing a potential method for the detection of wear debris particles with a high sensitivity and resolution and the diagnostic of mechanical system.     

Electrochromic Detection of Latent Fingermarks on Metal Surface Using 1,1′-Dibenzyl-4,4′-bipyridinium Dichloride

The electrochromic detection of latent fingermarks on polished or unpolished, flat or curved metal surfaces is described using electrochromic material, 1,1’-dibenzyl-4,4’-bipyridinium dichloride. The surface area covered by fingermarks acts as an insulating mask, causing 1,1’-dibenzyl-4,4’-bipyridinium dichloride to change color and produce inversed images of the fingermark. By changing the applied potential, the optical properties of 1,1’-dibenzyl-4,4’-bipyridinium dichloride can be continuously and reversibly adjusted to optimize the visual contrast of fingermarks, so as to realize the detection of latent fingermarks on stainless steel surface. It is demonstrated that the fabricated electrochromic devices can detect the fingermarks on these types of surfaces within twenty seconds at −1.0∼−2.0 V. This work can qualify as a tangible improvement in fingermark detection of the natural fingermarks on the never-cleaned (more than 3 years) and curved surfaces of daily-used container, e. g. cup, and the handle of cleaning tool, mop.     

Tuning C1/C2 Selectivity of CO2 Electrochemical Reduction over in-Situ Evolved CuO/SnO2 Heterostructure

Heterostructured oxides with versatile active sites, as a class of efficient catalysts for CO₂ electrochemical reduction (CO₂ER), are prone to undergo structure reconstruction under working conditions, thus bringing challenges to understanding the reaction mechanism and rationally designing catalysts. Herein, we for the first time elucidate the structural reconstruction of CuO/SnO₂ under electrochemical potentials and reveal the intrinsic relationship between CO₂ER product selectivity and the in situ evolved heterostructures. At −0.85 V_RHE, the CuO/SnO₂ evolves to Cu₂O/SnO₂ with high selectivity to HCOOH (Faradaic efficiency of 54.81 %). Mostly interestingly, it is reconstructed to Cu/SnO_2-x at −1.05 V_RHE with significantly improved Faradaic efficiency to ethanol of 39.8 %. In situ Raman spectra and density functional theory (DFT) calculations reveal that the synergetic absorption of *COOH and *CHOCO intermediates at the interface of Cu/SnO_2-x favors the formation of *CO and decreases the energy barrier of C−C coupling, leading to high selectivity to ethanol.     

Integrated Tandem Electrochemical-chemical-electrochemical Coupling of Biomass and Nitrate to Sustainable Alanine

Alanine is widely employed for synthesizing polymers, pharmaceuticals, and agrochemicals. Electrocatalytic coupling of biomass molecules and waste nitrate is attractive for the nitrate removal and alanine production under ambient conditions. However, the reaction efficiency is relatively low due to the activation of the stable substrates, and the coupling of two reactive intermediates remains challenging. Herein, we realize the integrated tandem electrochemical-chemical-electochemical synthesis of alanine from the biomass-derived pyruvic acid (PA) and waste nitrate (NO₃⁻) catalyzed by PdCu nano-bead-wires (PdCu NBWs). The overall reaction pathway is demonstrated as a multiple-step catalytic cascade process via coupling the reactive intermediates NH₂OH and PA on the catalyst surface. Interestingly, in this integrated tandem electrochemical-chemical-electrochemical catalytic cascade process, Cu facilitates the electrochemical reduction of nitrate to NH₂OH intermediates, which chemically couple with PA to form the pyruvic oxime, and Pd promotes the electrochemical reduction of pyruvic oxime to the desirable alanine. This work provides a green strategy to convert waste NO₃⁻ to wealth and enriches the substrate scope of renewable biomass feedstocks to produce high-value amino acids.     

Multiple Dynamic Bonds-Driven Integrated Cathode/Polymer Electrolyte for Stable All-Solid-State Lithium Metal Batteries

All-solid-state lithium metal batteries (LMBs) are considered as the promising higher-energy and improved-safety energy-storage systems. Nevertheless, the electrolyte-electrodes interfacial issues due to the limited solid physical contact lead to discontinuous interfacial charge transport and large interfacial resistance, thereby suffering from unsatisfactory electrochemical performance. Herein, we construct an integrated cathode/polymer electrolyte for all-solid-state LMBs under the action of polymer chains exchange and recombination originating from multiple dynamic bonds in our well-designed dynamic supramolecular ionic conductive elastomers (DSICE) molecular structure. The DSICE acts as polymer electrolytes with excellent electrochemical performance and mechanical properties, achieving the ultrathin pure polymer electrolyte thickness (12 μm). Notably, the DSICE also functions as lithium iron phosphate (LiFePO₄, LFP) cathode binders with enhanced adhesive capability. Such well-constructed Li|DSICE|LFP-DSICE cells generate delicate electrolyte-electrodes interfacial contact at the molecular level, providing continuous Li⁺ transport pathways and promoting uniform Li⁺ deposition, further delivering superior long-term charge/discharge stability (>600 cycles, Coulombic efficiency, >99.8 %) and high capacity retention (80 % after 400 cycles). More practically, the Li|DSICE|LFP-DSICE pouch cells show stable electrochemical performance, excellent flexibility and safety under abusive tests.     

A Semisynthetic Bioluminescence Sensor for Ratiometric Imaging of Metal Ions In Vivo Using DNAzymes Conjugated to An Engineered Nano-Luciferase

DNA-based probes have gained significant attention as versatile tools for biochemical analysis, benefiting from their programmability and biocompatibility. However, most existing DNA-based probes rely on fluorescence as the signal output, which can be problematic due to issues like autofluorescence and scattering when applied in complex biological materials such as living cells or tissues. Herein, we report the development of bioluminescent nucleic acid (bioLUNA) sensors that offer laser excitation-independent and ratiometric imaging of the target in vivo. The system is based on computational modelling and mutagenesis investigations of a genetic fusion between circular permutated Nano-luciferase (NLuc) and HaloTag, enabling the conjugation of the protein with a DNAzyme. In the presence of Zn²⁺, the DNAzyme sensor releases the fluorophore-labelled strand, leading to a reduction in bioluminescent resonance energy transfer (BRET) between the luciferase and fluorophore. Consequently, this process induces ratiometric changes in the bioluminescent signal. We demonstrated that this bioLUNA sensor enabled imaging of both exogenous Zn²⁺ in vivo and endogenous Zn²⁺ efflux in normal epithelial prostate and prostate tumors. This work expands the DNAzyme sensors to using bioluminescence and thus has enriched the toolbox of nucleic acid sensors for a broad range of biomedical applications.     

[2+2+1+1] Cycloaddition for de novo Synthesis of Densely Functionalized Phenols

A unique benzannulation strategy for regioselective de novo synthesis of densely functionalized phenols is described. Through metal-mediated formal [2+2+1+1] cycloaddition of two different alkynes and two molecules of CO, a series of densely functionalized phenols were obtained. The benzannulation strategy allows efficient regioselective installation up to five different substituents on a phenol ring. The resulting phenols have a substitution pattern different from those obtained from Dötz and Danheiser benzannulations.     

N=8 Armchair Graphene Nanoribbons: Solution Synthesis and High Charge Carrier Mobility**

Structurally defined graphene nanoribbons (GNRs) have emerged as promising candidates for nanoelectronic devices. Low band gap (<1 eV) GNRs are particularly important when considering the Schottky barrier in device performance. Here, we demonstrate the first solution synthesis of 8-AGNRs through a carefully designed arylated polynaphthalene precursor. The efficiency of the oxidative cyclodehydrogenation of the tailor-made polymer precursor into 8-AGNRs was validated by FT-IR, Raman, and UV/Vis-near-infrared (NIR) absorption spectroscopy, and further supported by the synthesis of naphtho[1,2,3,4-ghi]perylene derivatives ( 1 and 2 ) as subunits of 8-AGNR , with a width of 0.86 nm as suggested by the X-ray single crystal analysis. Low-temperature scanning tunneling microscopy (STM) and solid-state NMR analyses provided further structural support for 8-AGNR . The resulting 8-AGNR exhibited a remarkable NIR absorption extending up to ∼2400 nm, corresponding to an optical band gap as low as ∼0.52 eV. Moreover, optical-pump TeraHertz-probe spectroscopy revealed charge-carrier mobility in the dc limit of ∼270 cm² V⁻¹ s⁻¹ for the 8-AGNR .     

1,3-Sulfinate Migration Triggered by α-Imino Carbene and Divergent Zwitterion Cyclization: Synthesis of Cyclopropane,Dihydropyrrole, and Azepane Ring Systems

Cyclopropane, dihydropyrrole, and azepane ring systems were synthesized conveniently from sulfinate-tethered triazoles. The divergent synthetic strategy started with the unique 1,3-sulfinate migration of an α-imino carbene. The efficient reaction allowed control of the zwitterion bearing multiple reactive sites depending on the increased stability of the resulting carbocation and anion. The sulfinate was converted to a sulfone after the group migration, and a stable anion bearing two electron-withdrawing groups was thus formed. Catalytic amounts of iodide acted as a switch for the synthesis of cyclopropanes and dihydropyrroles. The reaction merits including readily available substrates, mild reaction conditions, and excellent functional group compatibility qualified this protocol a possible synthetic tool for cyclic compounds, especially for N-heterocycles.     

A Golgi Apparatus-Targetable Probe Based on Lanthanide Complexes for Ratiometric Time-Gated Luminescence Detection of Hydrogen Sulfide

Development of bioanalytical methods for selective and accurate detection of H₂S in living samples is essential for understanding the pathological and physiological functions of this gasotransmitter in biological systems. Here we report a Golgi apparatus-targetable lanthanide complex-based luminescent probe, Golgi-ABTTA-Eu³⁺/Tb³⁺, that can be used for accurately determining H₂S in aqueous solution and living cells via the ratiometric time-gated luminescence (RM-TGL) technique. This probe is composed of 2,2′:6′,2′′-terpyridine-Eu³⁺/Tb³⁺ mixed complexes as the luminophore, 4-azidobenzyl-ether as the responsive moiety, and sulfanilamide as the Golgi apparatus-targeting moiety. Upon reaction with H₂S, accompanied by the cleavage of 4-azidobenzyl group from the probe molecule, the long-lived emission of Tb³⁺ complex at 540 nm is significantly enhanced, while that of Eu³⁺ complex at 610 nm is obviously reduced. It was noted that the I₅₄₀/I₆₁₀ ratio increased by 8.8 times after the probe was exposed to H₂S, which enabled H₂S to be detected with RM-TGL method. After being incubated with living cells, the probe molecules were selectively accumulated in the Golgi apparatus, which allowed H₂S in the Golgi apparatus to be successfully imaged in RM-TGL mode.